Stewart golf Remote Control Repair
Job Timeline (Ref 14210-20)
Independent Repair Service Notice:
We are an independent repair service and are not affiliated with any of the brands or manufacturers shown on this website.
All items are customer-owned devices sent to us for professional repair services.
Brand names and logos are used for identification purposes only.
Stewart golf Remote Repair Details
Manufacturer
Stewart golf
Customer's Fault Description
I plug the remote in and it doesn't charge. The light goes to green as if its fully charged and not red as if its charging
Remote Fixer Repair Response
This remote arrived safely from Hull and on testing was confirmed to be dead.
On opening the charging circuit was found to have blown (see image)
This was due to an incorrect or faulty power source being used to try to charge the item.
The IC and resistor was replaced which restored full functionaity. The control was tested through a full charge cycle and the item retained its charge.
IMPORTANT - Please note that this fault WILL happen again if an incorrect power source is used therefore it is advised to not use whatever source was used last time that created the fault, if an incorrect charger is used this fault will happen again and will not be covered by any guarantee. Only a 5V charger with the correct polarity is to be used.
Images of Customer's Remote Control
The following images show the actual remote control sent to us by the customer for professional repair services.
