Truma Remote Control Repair
Job Timeline (Ref 15324-20)
Independent Repair Service Notice:
We are an independent repair service and are not affiliated with any of the brands or manufacturers shown on this website.
All items are customer-owned devices sent to us for professional repair services.
Brand names and logos are used for identification purposes only.
Truma Remote Repair Details
Manufacturer
Truma
Customer's Fault Description
Does not power up sometimes unless you remover a battery and put it back in. The green light will then come on but will not switch off when putting the remoter to 0 the off position
Remote Fixer Repair Response
This Truma Motor mover remote controller arrived safely form Darwen and on inspection had signs of an attempted opening prior to arrival with us.
When tested the power switch was erratic.
When opened the issue was found to be caused by the usual broken mounting pin for the PCB which allowed the PCB to move freely inside, this in turn was making the internal switch only occasionally touch the outer slide switch.
The PCB was hot glued into place which restored full functionality. The on off switch was also replaced.
Images of Customer's Remote Control
The following images show the actual remote control sent to us by the customer for professional repair services.
