Henderson 800 Delux Mark 2 Remote Control Repair
Job Timeline (Ref 18181-20)
Independent Repair Service Notice:
We are an independent repair service and are not affiliated with any of the brands or manufacturers shown on this website.
All items are customer-owned devices sent to us for professional repair services.
Brand names and logos are used for identification purposes only.
Henderson 800 Delux Mark 2 Remote Repair Details
Manufacturer
Henderson
Model
800 Delux Mark 2
Customer's Fault Description
Remote works by pressing large red button which illuminates adjacent green light to confirm signal sent to garage door receiver.
This is no longer working due to pink capacitor having come loose from circuit board in remote? The capacitor is loose in the remote and was secured to the right of the circuit board if that helps. The remote is working once the green light is illuminated on pressing red button.
I have removed the 9V battery which is accessed under black tape.
Many thanks.
Remote Fixer Repair Response
This Remote Control for Garage Doors arrived safely from Oxford and on inspection was found to rattle. When tested the remote was dead.
On opening there was 2 issue, the first being that a resonator had broken away from the PCB, this was refitted and then it was found that the button was sluggish in response. A replacement button was fitted which restored full functionality.
Images of Customer's Remote Control
The following images show the actual remote control sent to us by the customer for professional repair services.
