Maha Remote Control Repair
Job Timeline (Ref 24253-20)
Independent Repair Service Notice:
We are an independent repair service and are not affiliated with any of the brands or manufacturers shown on this website.
All items are customer-owned devices sent to us for professional repair services.
Brand names and logos are used for identification purposes only.
Maha Remote Repair Details
Manufacturer
Maha
Customer's Fault Description
The remote is not sending a signal to the brake roller tester. LCD is also not working but this is not as important, if it can be repair great but not worried if not.
Remote Fixer Repair Response
This Brake Roller Tester remote arrived safely and on inspection was found to have a damaged screen and missing / damaged buttons. The remote was dead.
On opening the oscillator was detached from the PCB and the bare ended wires were loose inside the case.
The oscillator was replaced and soldered correctly. This did restore initial startup power but unfortunately the remote would die within a few seconds. A limited component test was carried out but sadly the issue could not be pinpointed (there is a severe lack of service information on these items). It is thought that the loose bare ended wires could have shorted out to any part of the PCB causing the issue.
This item was disposed of as per our sites terms, 19 Aug 2025
Images of Customer's Remote Control
The following images show the actual remote control sent to us by the customer for professional repair services.
