Job Timeline (Ref 5442-6374)
Remote Returned to Customer
A Timeline of this job can be seen below.
Arrived - 25-Feb-2020
Fault Diagnosed
Remote Repaired
Payment Received
Returned - 07-Mar-2020
Repair Engineer : Martin Smith
LinkedIn
Facebook
Truma GO2 Remote Repair Details
Manufacturer : Truma
Model : GO2
Customers Fault Description : Light briefly displays when switched on (milliseconds). I tried new batteries, and trace the voltage with a multimeter, the switch seems ok.
Remote Fixer Repair Response (see below) :
This caravan motor mover control arrived safely and on testing was confirmed to not be powering on (only a micro blip could be seen)
On opening a full test was carried out and it was concluded to replace the entire PCB as luckily one was spare.
This restored functionality but it is advised that the customer may need to pair the remote with the receiver (instructions can be seen below)
Pairing The Truma GO 2 with its Receiver
Firstly - check that the drive rollers are not applied.
- Press the Rest button (h) on the receiver for approximately 5 seconds, this should make the green light (i) flash when the button is released
- Turn the handset on using the slide switch (a), this should be all that is required to pair the two items.
Remote Images
