Carver Remote Control Repair
Job Timeline (Ref 5989-7022)
Carver Remote Repair Details
This Carver control arrived safely and on testing was found to have erratic power.
On opening the control, the negative (black) wire to the power block was found to have been crimped in the case cutting through the cable (see image). The wire was cut back to remove the break and soldered correctly into the PCB. This restored normal functionality and the control powers one at each double power button press.
Please note the loose wire (orange one) is only meant to be connected at one end as this is the aerial. The included batteries were disposed of as it is very dangerous to "mix" brands of batteries as this can lead to battery leakages which can be cataclysmic to any electronic device. Replacement batteries were supplied of all the same brand
Please also note that this control will turn off after 30 seconds of non use, this is normal operation to prevent battery drain.
Remote Images
The above images show the actual remote control sent to us by the customer for professional repair services.