Firmamatic GDO4 Remote Control
Device Specifications
| Make: | Firmamatic |
|---|---|
| Model: | GDO4 |
| Signal Type: | Radio Frequency |
| Equipment Type: | Garage Door |
| Frequency: | 27.145Mhz |
| Repair Price: | £20 Book Repair |
Have a Faulty Remote?
No Fix, No Fee Policy
Fixed Price Repairs
Professional Repair Service
Let our experts repair your remote control with our guaranteed service.
Book Your Repair NowDescription
This Firmamatic GDO4 garage door opening remote control is radio frequency and runs at 27.145Mhz
Programming a Firmamatic GDO4 remote (often associated with ATA garage door openers) typically involves syncing the remote with the garage door opener’s control unit. Based on available information for similar models, here’s a "possible" guide to program your Firmamatic GDO4 remote:
-Locate the Control Panel:
-Open the light cover on the garage door opener by pressing in on both sides and pulling down to access the internal control panel.
-Find the “Door Code” button (sometimes labeled as “Code” or similar) on the control panel.
-Enter Programming Mode:
-ress and hold the “Door Code” button continuously. Keep holding it throughout the next step.
-Program the Remote:
-On the remote, select the button you want to program.
-Press and hold the chosen button for 2 seconds, release for 1 second, then press and release it again.
-Release the “Door Code” button on the control panel.
-Test the Remote:
-Press the programmed button on the remote to check if it operates the garage door. If it doesn’t work, repeat the steps.
Programming a Firmamatic GDO4 remote (often associated with ATA garage door openers) typically involves syncing the remote with the garage door opener’s control unit. Based on available information for similar models, here’s a "possible" guide to program your Firmamatic GDO4 remote:
-Locate the Control Panel:
-Open the light cover on the garage door opener by pressing in on both sides and pulling down to access the internal control panel.
-Find the “Door Code” button (sometimes labeled as “Code” or similar) on the control panel.
-Enter Programming Mode:
-ress and hold the “Door Code” button continuously. Keep holding it throughout the next step.
-Program the Remote:
-On the remote, select the button you want to program.
-Press and hold the chosen button for 2 seconds, release for 1 second, then press and release it again.
-Release the “Door Code” button on the control panel.
-Test the Remote:
-Press the programmed button on the remote to check if it operates the garage door. If it doesn’t work, repeat the steps.
Common Faults
Possible Solution:
Faulty 27.145 Mhz oscillator