Royal UM204 Remote Control
Device Specifications
| Make: | Royal |
|---|---|
| Model: | UM204 |
| Signal Type: | Radio Frequency |
| Equipment Type: | Caravan Motor Mover |
| Frequency: | 433Mhz |
| Repair Price: | £20 Book Repair |
Have a Faulty Remote?
No Fix, No Fee Policy
Fixed Price Repairs
Professional Repair Service
Let our experts repair your remote control with our guaranteed service.
Book Your Repair NowDescription
This is a radio frequency caravan motor mover remote control handset.
Pairing Process (Generic Steps Based on Similar Systems):
- Turn off the remote control if it’s on.
- Power on the control unit via the caravan’s main power switch or isolator.
- Press and hold the reset button on the control unit until an LED (often green or red) starts flashing. This indicates the control unit is in pairing mode. Release the reset button.
- Turn on the remote control. Some systems require pressing a specific button (e.g., the reverse or power button) while turning it on. The LED on the control unit may flash faster to confirm the remote is detected.
- If the remote has a flashing LED when powered on, this may indicate it’s searching for the control unit.
- Once the LED on the control unit stops flashing or changes to a steady light, the remote should be paired.
Pairing Process (Generic Steps Based on Similar Systems):
- Turn off the remote control if it’s on.
- Power on the control unit via the caravan’s main power switch or isolator.
- Press and hold the reset button on the control unit until an LED (often green or red) starts flashing. This indicates the control unit is in pairing mode. Release the reset button.
- Turn on the remote control. Some systems require pressing a specific button (e.g., the reverse or power button) while turning it on. The LED on the control unit may flash faster to confirm the remote is detected.
- If the remote has a flashing LED when powered on, this may indicate it’s searching for the control unit.
- Once the LED on the control unit stops flashing or changes to a steady light, the remote should be paired.
Common Faults
Possible Solution:
Replacement battery cable required