Repair Work Carried Out At Remote Fixer
Hunter Stove Repair
The fault is exactly as per the example on your website. The down button on the remote works fine. The up button appears to send the signal from the remote but the led on the receiver doesn't light up and the fire doesn't respond. Also, the 9v connector wire snapped at some point some time ago and has been repaired with Sellotape(!) so if it's possible to fix that properly at the same time that would be great! Finally, there is some corrosion on the battery contacts in the receiver. I have attempted to sand this off but not sure if you can do a better job?
Gazco Repair
Spilt wine on remote Neither it or wall mounted control will work
Valor Repair
The remote was dropped on the hearth and has now stopped working. No buttons appear to work. I've changed the batteries, but to no effect.
Creda Repair
The showers switches off unexpectedly or won’t switch on at first time of asking , I have replaced the main pcb but still have the same issue, screws missing from the rear battery compartment cover .
PowrWheel Repair
It is difficult to power it on, once it is powered is seems to be ok, but sometimes takes 30 minutes to power on, which obviously is not ideal. So at least power buttons seems to be affected but please check all of them.
Mertik Maxitrol G30-ZRHTT Repair
No longer works. All batteries replaced (both remote & receiver). The remote screen is working, but it is not activating the receiver (it was working a day or so ago).
HCF1 6552020002 Repair
Most of the protective covering of the lead has disintegrated, so a new lead is required. Some wires have come adrift from the control, board and need reconnecting
Bose RC38T1-40 Repair
the remote control has suddenly stopped communicating with the sound system none of the buttons work on the remote - not even on/off we now have to control from the sound system rather than using remote
Celebrity TH7R-2039-006 Repair
Wire all shredded up/damaged and needs to be replaced.
Arcam solo movie mk2 Repair
Purchased as an ex-display (as new) unit so have not had it in working condition. On insertion of batteries remote backlight lit. Volume up/ down power on /off worked. Successfully Went into program mode (to assign Panasonic TV) and entered a few numbers. Then remote became unresponsive. Batteries out/ in/change nothing helped. Tried again later and this time worked again for a short period time tried a factory reset but only certain random buttons responded. Then it died again. It is not the batteries as several were used and are still in use in current RC. thanks
Mertik Maxitrol Repair
Batteries expired, some leakage, contacts cleaned but unit not working with new batteries. Remote control is fine. Model is G30 ZRRTB
Philips Repair
There is a loose connection, which means some keys on the remote are not registering. Especially on the main “home” key.
Willowbrook Repair
The cable has been chewed up in the mechanism in several places! I’m also looking for another complete unit for the other side of the bed if you can source that?
Recliner char Repair
Working correctly apart from 1 x button sticking. However would like to replace the coiled cable as it is breaking and freying.
Mertik Maxitrol B6R-H8TL3B Repair
Remote is dead. No display. Does not function. New Duracell batteries fitted, no change. No physical damage. Working two days ago. Unexplainable...
Celebrity Repair
Recliner chair by Hal. All buttons work except the foot/leg riser. Curly cable split.
Multiglow gas fire Repair
Red light comes on and buttons seem to function but nothing happens. Control mechanism works OK with manual operation