Historic Repair Work at Remote Fixer

Amcor Repair

The remote is completely dead – it flash 12:00 for about 3 sec when a new set of batteries were inserted but now there is no response

HSL recliner chair Repair

The foot /leg raise button, bottom left of four buttons, no longer works. The others seem OK

TRUMA M2 Repair

Corroded spring battery connections

SONY RM-ED008 Repair

Buttons in particular not working are: Mute, Sound and Programme, do not connect with TV. Some of the other buttons are a bit loose so need to be checked over.

Purpleline e-go Repair

Moisture corrosion to battery connectors.

Reich Repair

Battery connection faulty

Celebrity Repair

Cable needs sorting.

Velux Repair

Remote completely dead

Powrtouch Repair

After using the remote it does not turn off, which in turn discharges the battery. So far this year we have had to disconnect the battery, resulting in the black wire becoming broken

Velux Repair

No buttons working

Powertouch Classic Repair

Remote will not operate on battery. It works fine tethered to the motor mover with a cable and the battery removed.

Siep SE40 Repair

Not functioning

Robokaddy Repair

Unit has been dropped and has scince and is showing light and has some intermittent respone but no longer working properly.

RK Repair

It will very randomly switch but not stay on. But most times wont switch on at all. Have changed battery but still no good.

Velux Repair

Soneva Repair

Awning controller not functioning. Replaced battery but no red light to indicate controller is working.

Swithland Soneva Repair

With a new battery inserted the red indicator light stays on permanently.Pressing In or Out Buttons has no effect.

Brake Roller Tester Repair

Main button doesnt work

Quad Series 99 Repair

Remote doesnt work.

Aa3 Repair

Done work

Faber CE0122 Repair

Turn on button has dropped out of remote control

Aiwa RC-ZAS16 Repair

inside where you put the batteries got battery acid on and also the button that lowers the volume does not work.

enduro Repair

Corroded middle positive connection otherwise works fine, but concerned that this connection will eventually fail

NRG Automation Repair

Not working