Repair Work Carried Out At Remote Fixer
Quattro technology Repair
As per phone call reverse and button to the right hand side of reverse button (I have lost 1 of the 4 tiny screws that hold the circuit board in place
E go remote caravan motor mover Repair
Remote light not coming on or intermittent
Dimplex RC01-022 (RC01-008 - Variant) Repair
Fire does not respond to remote control - batteries have been tested and are ok
hsl chair Repair
Buttons need to be pressed really hard, sometimes dont work at all
Powertouch Repair
Remote will not power up, was intermittent now doesn’t work at all.
Dimplex Electric fire Repair
On / off button not working. Will work when changing between functions. Fire to be turned on manually
Easydriver Repair
The handset was dropped in water and hasn't worked since.
Mertek Maxitrol G6R-H4T5 Repair
I noticed that the display was indicating a low battery which was replaced. After a short time the battery indicator again showed a low battery so I thought I’d used a faulty replacement battery. I changed the battery yet again and tested the voltage before fitting and the voltage was found to be 9V. Again after a short period and without using the remote to control the fire, the display was found to be blank. I tested the battery and it was down to 1.6V. It was then that I realised that the remote was draining the battery very quickly and must have a fault.
Celebrity TH27 Repair
Buttons not working Some did before i cleaned contacts !!!
HSL (4-button and reset) Repair
The usual: frayed, split shroud on 8-core cable at handset strain relief.
Motocaddy Repair
Appears to charge, but only left and right buttons seem to work.
Kal-Fire Repair
One button not working. There are 4 buttons down v,up ^, menu and on. There is also an LCD screen. After pressing the menu the time flashes on the screen, this can be changed down with the down button and up with the up button. The up button ^ is not working, possibly due to liqid or moisture penetration.
Bigzzia Repair
The remote started to take several attempts at pressing the button each time to work but now doesn’t work at all. It’s definitely the remote and not the machine. I’ve tried to change the battery and this doesn’t seem to work. The remote is the same as one displayed on your website. Thank you.
Bell fires Repair
Remote won’t switch on even with new batteries, remote is cracked after being dropped
Ryno mmr3 Repair
The handset turns on and moves about 2feet then stops. All lights are on the handset and it has a new battery in the handset plus the leisure battery was fully charged.