Repair Work Carried Out At Remote Fixer
Again Faster Repair
Remote intermittent. Gradually been getting worse. Has been opened and cleaned but cant seem to see anything obviously wrong with it. Was knocked off the side when it started.
RK Reich 527-0521 Repair
double push power sync button won't light up to connect to mover
Enduro Purple line Repair
Not lighting up No response from mover.No battery cover
Flamerite Repair
The remote turns the fire on but the button marked 0/1 does not work so can't try button 0/2 and the light up & down button is flickering & sometimes doesn't work
Quattro Repair
Does not keep pairing between the controller and the caravan. Sometimes it works, but mostly it fails.
ENDURO M 103 Repair
LA TELECOMMANDE N'EMET PAS Le bouton de mise en route est HS
Gazco Repair
Low battery signal when new batteries have been installed. Remote works intermittently but mainly doesn’t turn off fire.
Quattro Repair
2 of the buttons aren’t working. The back button and one of the back left or right button. I can’t remember which one
Hsl Repair
Bottom left button needs huge pressure to operate - all others work - it’s a 5 button remote
Reich MoveControl 527-0580 Repair
Similar to your example problem on the website. It takes about 20 presses on the red button for the remote to switch on (when it should take 2). I really hope you can help!
Telcamit Repair
I have 2 remotes, both for the same application. The black/red remote has a broken wire and the grey remote doesn't work at all
ADJUSTAMATIC Repair
Visible broken cable, causing intermittent fault/connection.
Velux 101 50 01 Repair
the light does not work, therefore unable to open/close the blind.
Purple line Ego Repair
Green light flashes when batteries are inserted but will not turn on by the on switch
Truma Mover SE Repair
We recently bought the caravan - 1st used the mover & it worked ok - 2nd time we went to use it, it bleeped then cut off, twice, thought it could be the batteries, and when we opened the battery cover a piece of tin foil fell out and we saw the corroded and broken battery terminals. Is it possible to have new terminals fitted and tested for any other faults?