MPT 1340 Repair

We got two of these when we moved to our house. This one has never worked. We tried replacing batteries (takes tiny 397 batteries) but no luck. So we just use the other one but now that has gone missing so I tried to fiddle with this one and one of the battery enclose metal bits snapped. I hope this is something you may be able to repair?

ego 0309 UK Repair

Remote doesn't work. when the batteries are placed in the controller the LED flashes twice then nothing. No LED light when the power button is pressed.

Sirius be free s6/s 433.92mhz Repair

Became intermittent and now dead. Have tried changing battery etc

Purpleline Quattro Ego400 Repair

No life in remote control, no lights showing. Changed new batteries but still no life in remote control.

Dunlopillo Repair

Remote still working .but wires worn

Sherborne reclining chair Repair

Chair not working, suspected handset problem. Wires into handset exposed.

Marantz RC011CR Repair

There was a battery leak. The area has been cleaned but none of the buttons are working.

Quattro Enduro Repair

no light comes on when switched on so doesnt operate. changed the batteries but still no response

Panasonic Recorder IR6 Repair

Slow / Search / Pause and Play buttons have become unresponsive

Firmamatic Repair

Red light on all the time, garage door goes up and down

Sirius BeFree S6/S 433,92MHz Repair

Water dripped into the remote holder. Since then it only works sporadically. I replaced the battery but it didn't help

Mertik Maxitrol Repair

Totally dead, batteries changed in both transmitter and receiver.

Velux Repair

No power on remote and no battery cover

Gazco Repair

Occasionally the buttons work but 99% of the time they don’t. When they do light up they control the fire

Orbitsound Repair

Remote doesn't function even with new battery. The soundbar is connected to my Panasonic smart TV and I can control the volume level using the Sky Q box remote, however I can't adjust the bass and treble settings for the soundbar.

Kinder Repair

Bottom of two buttons used to ignite the fire is not working

Zap Repair

Top left button not working

B&O Repair

Controls not functioning

BSSB Repair

The charging port on the circuit board has become dislodged

AIWA RC T91ML Repair

Just not working

Reich GmbH Repair

Battery attachment clip has come off the wires, the wire have become too short to be fix to battery. I also suspect a wire has broken or become detached under the printed circuit board. Battery cover also missing!

Adjustamatic Repair

the curly cables on both of these controls need replacing due to the plastic coating disintegrating over the years. They are both in working order.

Steiss Profiling Bed Repair

At end where controller plugs into the bed, the internal wires are showing where the outer casing has pulled/stretched/other. Need internal wires not to show.

Flamerite Repair

Led red light stays on all the time that the battery is in place. Does not operate the fire.