Repair Work Carried Out At Remote Fixer
HSL handset for rise and recline chair Repair
the reset button has been a bit hit and miss for a short while but today it was in the most tilted up position for my husband to sit in but then no button will work and we are unable to use the chair because we cannot even reset it. none of the buttons will shift anything.
magic mover 2 Repair
new battery but no light, no movement in the caravan mover
Mertik MAXITROL Repair
Will not ignite fire - batteries have been checked and a similar remote works therefore remote is at fault not fire.
Bssb tv bed Repair
The buttons to make the lifter go up and down dont work these are the main buttons used
Platonic PF10 Socrates Repair
The unit does not start the gas fire. When operating the light on the remote control is yellow in colour when it should be green
Celebrity TH27-2039-015 Repair
Button on right doesn’t work to control leg rest
RCS01C Repair
It seems that the battery leaked in the remote control and it no longer works
Powertouch Repair
Detached negative wire to battery connector. Also when battery is connected handset is permanently on. Green light on constantly and should only light up when two on buttons are depressed for a few seconds.
HSL Repair
Top 2 buttons which raise and lower the chair back are inoperable.
Flamerite Fires Repair
On and off button not working and red light stays on if remote switches on and seems to flatten the battery .
Royal Cozyfires Repair
The remote control does not work at all. The batteries in it when my father moved in were ‘mottled’ suggesting that they had corroded inside the remote. I replaced them but that didn’t fix the problem.
Willowbrook Recliner Repair
Cable cover split and it still works at the moment but I need to replace cable before mother damages it further. Larger 8 pin plug into chair
Celsi Flamonik Enchant and Rapture Repair
Remote control completely dead New battery fitted, no change
Fantasia / B&Q ID8 Repair
1. Remote does not control fan/light h it used too) 2. Remote light transmit remains on when any button is pressed
Gazco Repair
The remote will not always turn the fire on and off and the up and down button to control the flame/heat output do not work
A J Way & Co Repair
The control was working intermittently and the light would light up intermittently for several weeks but then it stopped working altogether. My chair is 12 years old but perfectly usable if the hand control would work. No buttons work on the hand control now
Ucosan Combipool Repair
Remote control terminals were corroded due to moisture.