Repair Work Carried Out At Remote Fixer
Mertik Maxitrol G30 ZRHS Repair
The handset fell on to the stone kerb and would not work after that
TRITON Repair
The buttons to increase the fan speed and the button to increase the heat temperature do not work.
Gazco Repair
Manual control buttons are faulty and will not turn fire on or off.
Gazco Riva 67 - part number 8456 Repair
Mostly not working and unable to turn on/switch off fire almost all of the time.
Purpleline - caravan mover ENDURO SERIES II Repair
Evet if the bluetooth paring seems to work (as shown by unit board leds) and there is no alarm led switched on on unit board, when pressing all buttons on remote control any relay on unit board is commanded and there is no movement of the mover.
NU-FLAME G6R-HIO-N2 Repair
The battery became corroded and the remote no longer works
PDT KF04-433RC (x 2 off) Repair
Bothe remotes went through the washing machine
TRITON 83309640 Repair
Heat up button is not working and top of button has come off.
Hunter stoves XHG0610A Repair
The remote working but some time cut off .i check it i found the up/down buttons needs replacement please
Fire RCS-01C Repair
Just doesn't work. Tried new batteries but didn't help.
Mertik Maxitrol (GAZCO) G30-ZRHSO-Z26 Repair
This remote was purchased for £96 two months ago on behalf of my mother who is 85yrs old. She can't remember where it was bought from and does not have a receipt. The fire does not switch on or off with the remote so hoping you can fix it.
Ceiling Fan Repair
This is a small battery operated remote control unit for a ceiling fan. It has been dropped and the spring which connects to one of the batteries is missing. If you are able to repair it, there is a second broken remote for this fan which I would also give you to fix.
Keyton Repair
Older model, similar to one on your You Tube video. Not connecting to chair any more. Very occasionally it connects.
Brilliant slab 16 Repair
When pressing the buttons the yellow light rarely flashes, guessing the switches need replacing..sometimes works after pushing a few of the buttons
POWRTOUCH SERIES1 Repair
I have a problem with the remote handset for a series 1 Powrtouch mover...... When depressing the 2 red buttons to switch on the handset the green light flashes rapidly and the caravan nearside roller starts moving the caravan backwards (without depressing any of the direction buttons). The only way to switch off is to remove the battery.
Reich 527-0521 Repair
Read on an off button is temperamental sometimes it comes on sometimes it doesn’t come on I tried new batteries and resetting it but the still doesn’t work