Recent Repair Jobs
BeModern RCS01D Repair
No response after replacing batteries.
The batteries inside the remote corroded (white liquid inside remote). I cleaned the remote and tried new batteries but the remote isn't working properly. Information is being displayed however I can't adjust the settings or turn the pilot on. Thanks
Bose Rctv1-40 Repair
Working intermittently but mainly volume controls
Purple line Ego Repair
Green light flashes when batteries are inserted but will not turn on by the on switch
MAHA RHL 111 Repair
NONE OF THE UNITS ACTIVATE THE EQUIPMENT HOWEVER THE TORCH FUNCTION WORKS SO BATTERY OK.
Mertik Maxitrol G6R-R4AUT & G6R-H4S Repair
3 months ago all functions worked normally except when we wanted to turn the fire on. This needed the remote to be touching the receiver aerial. For the last couple of days ago all communication between the remote and receiver has failed, even when the remote is touching the aerial.
Faber Mertik Maxitrol G6R-H4T2-Z2 Repair
Black wire on battery clip has become detached.
Mertik Maxitrol G30-ZRRS Repair
The receiver in the fire is not registering the 'up' command from the remote control and is not opening the gas valve as required. Both buttons register as operational on remote, they both illuminate the LED on the remote. The receiver illuminates with the 'down' command from the remote but not with the 'up' command.
Celebrity (Motion Furniture Ltd) Repair
The coiled cable (9 core) has seriously frayed at the entry into handset, and elsewhere along its length. Some cables have broken, at the handset. Plugs are still attached at both ends (8 pin DIN and RMC, I think?)
After dropping the remote it became harder to control the fire until the remote stopped working altogether.
RSO192SRD1e PDT KF04-433RC Repair
Soldered joint on battery compartment breaks whenever batteries are being replaced.When soldered the battery space is too tight to allow batteries to be inserted, resulting in soldered joint to break!
The unit will switch on but fiddly to do so.Suspect worn pads or misalignment.its the on off buttons. Lefthand and right hand side.
Datatool Veto Evo Repair
Besenzoni 7cs 99001 Repair
Bought boat in October 2019. Remote control did not operate at all. The actual Passerelle works fine with the wired control on the boat.
Stopped working, cannot switch fire on or off
Celebrity TH7R-2039-002 Repair
Probably needs a new cable as it is damaged for the first foot from remote and I can see some inner wires are broken. 8 pin
Despite a new battery still not working. No light
Lower two buttons - standby and low flame - not working
gazco riva 67 Repair
Buttons don't appear to work, appears to mainly be start/ignite
this is a controller you gave us ages ago but the connection that goes into the bed has come away from the control handset
Bush CBAR4 Repair
- Volume bottom not working
Maxitrol G6R 002919 Repair
The Battery Terminal has come loose from the electrical wire. The Built in Gas fire is only 6 years old but the manufacturer will not issue us with a new remote control so we are hoping you can fix it. It was never a strong casing either.