Historic Repair Work at Remote Fixer
Browse our archive of completed remote control repairs. Showing page 242 of 318 (7,633 total repairs). We no longer list individual jobs — these are historic records.
Treadmill Repair
Wont turn treadmill on. I do have another remote that does work though so it is definitely the remote which is faulty.
View Details
ZAP KEY MPT 1340 Repair
Seeming dead remote. desperate for a repair as its the the only device we were left for the Garage door.
View Details
NRG Automation Repair
Button “A†only works occasionally, even though there is sometimes a blue light signal, the door doesn’t go up and down. Button “A†is the only button programmed
View Details
Musical Fidelity Repair
Remote controls 3 different devices , but I only have one, the CD player. CD controls are all below the blue buttons. Not worried about those above. A few of the lesser used CD buttons still work. They are on the two rows beginning with "check" , and ending "display". However, they can be temperamental. The others are either intermittent or don't work at all. ie. "Search" button, used to fast forward or reverse playing CD only works the reverse, not the ff. Numbers 3 and 5 don't work at all. Neither does the "+10" button on the CD top row. Hoping you can make all the CD buttons works consistently.
View Details
Truma Repair
Handset on/off switch not working. Handset has to be set on by removing/replacing a battery. It cannot be switched off but does automatically turn off after a few minutes. Note: just to clarify my attempts leading up this situation. The system operated normally a day or so ago when I moved the caravan. After moving the caravan I put the legs down and wanted to disengage the rollers. At this point the handset refused to work I replaced the batteries (1.2v each) with a new set at 1.48v. The switch didn’t work but the handset led flashed at 5hz and the led wouldn’t go solid (normal for operation and allowing connection to the control box). After many attempts (battery out/in) I got a solid led and was able to retract the rollers. I then moved the caravan by hand as it was very close to a wall which prevented me accessing the manual roller disengaging socket. More repeated attempts were unsuccessful. Then today, out/in battery routine worked and I was able to engage/disengage the rollers several times.
View Details
Homcom A90-252v70 Repair
Hello. I just saw your YouTube video for the Homcom treadmill remote and I have the same remote. None of the three buttons illuminate the led.
View Details
Enduro Repair
remote fails to switch on when pressing the on button twice as I believe you need to do. Just purchased on second hand market without instructions. Battery replaced.
View Details
VIBRADORM 00.103.240 Repair
IT HAS STOPPED WORKING. WE HAVE PUT NEW BATTERIES IN TOO. THIS IS PART OF A KINGSIZE BED.
View Details
Fantasia Sigma Ceiling Fan Repair
This remote control works by radio frequency (according to the manual!). The fan speed buttons (H/M/L) and the fan OFF button work perfectly. The problem is the light on/off and dimmer switch - this has pretty well stopped working. With persistence, I can get the light to go on or off by pressing repeatedly until I get lucky, but this is getting more and more difficult and most of the time the button doesn't work. When working correctly, the light button should turn the light on/off with an instantaneous press and release, or control the dimmer function by holding the button for longer.
View Details
Brake Tester Repair
Doesn’t work unless it’s tapped, but over time its become less responsive, I take it apart and put back together and works for a short period. I’ve changed the obvious like the batteries also
View Details