Repair Work Carried Out At Remote Fixer
Bellfire Maxitrol Repair
All buttons appear to be working. Double click function does not seem to be working but not a big problem for us. However worrying rattle as discussed with you on the phone
RCS-01C Repair
Buttons only work intermittently if at all even after replacement with new battery’s
HSL Repair
This has stopped working gradually let rise first then the rest of the electric chair. We have a mains power supply going the chair this has been checked and is working.
HSL Repair
HSL 8 pin chair remote control in full working order needs a new outer cover for the wires as it is perished It’s still working fine but won’t pass the PAT test
Mertik Maxitrol Repair
Battery indicator flashing when new battery fitted. Will not control the gas fire
Quattro EGO400 Titanium Repair
Remote does not turn on with power button. Brand new batteries have been installed. I have tried using WD40 Contact Cleaner.
Villeroy and boch Whisper whirlpool Repair
The batteries leaked and the remote is temperamental. Sometimes it will turn on but not off. The air jet button does not work.
Flamerite Fires Repair
The plastic covers on the on and the off button have broken off and fell inside the remote and you can see through the holes to the motherboard.
Celebrity motion furniture Repair
Foot rest controls don't work. Been repaired once but has stopped working again.
Well steraler Sky Europe bvba Repair
Powers on, however the red mode button normally changes it from off to on and send a little rf signal which is displayed on thr remote.
Quad Repair
It suddenly stopped working. Cannot see any light from the led using camera on mobile phone. Have tried new batteries without success.
Celebrity Repair
Handset will not work chair, handset lights continuously on
Emove EM303A Repair
Got an remote control for our caravan tried to put a new battery 9V 6F22 but does not come on green the terminals inside do not connect to the battery tried quite a few times but no luck
Vibraform Repair
Remote dropped on floor and some of buttons, particularly all of the raise buttons are no longer showing the red power light flashing when pressed and there is no response from the bed. Pressing the lowering buttons does cause the bed controller relay to click, but since the bed is fully lowered, the motor does not operate.
TV-54K2 Repair
No buttons working after changing batteries. There was a slight leak from one of the changed batteries.
Glow worm climapro 2 Repair
My autistic daughter threw the remote, it now lights up but no words etc come on
