Repair Work Carried Out At Remote Fixer

Celebrity

Celebrity Repair

Buttons sticking on remote

Gazco

Gazco Repair

It works, but is very weak. You have to be right next to the fire for it to function It used to work perfectly

Sherborne

Sherborne Repair

Needs a new wire as it’s taped up. Handset is fully working

Hormann  HS (M) 2/4

Hormann HS (M) 2/4 Repair

Whilst both these remotes have worked historically alongside two others we have which still do work, and with a decent battery, they show a red light to suggest they are transmitting a signal, the garage doors don't respond by opening or closing. I have tried pairing them again just in case it was the issue, but even having done this they still do not operta ethe doors as they used to.

Sherbourne

Sherbourne Repair

Wires are loose?.

Quattro

Quattro Repair

Hi all buttons are not working apart from the one that I have marked with at ✔️.


Truma Mover TE

Truma Mover TE Repair

Battery leak

invacare

invacare Repair

bottons working but cable worn

Emove

Emove Repair

The remote is not powering on, despite a new battery. Back panel for battery compartment is missing. (Similar to this repair on your site https://remotefixer.co.uk/repair-17807.html)

H S L

H S L Repair

BROKEN CABLE RIGHT NEAR CONTROL

Sherborne

Sherborne Repair

Cable and 8-pin Din plug missing, removed due to deterioration of cable!

HSL

HSL Repair

The HSL chair has locked in the position with the leg rest fully elevated.a green light is on, on the power supply box. Sending you the remote to initially check it out. Thank you.


CELSI  PANORAMIC ELECTRIC FIRE

CELSI PANORAMIC ELECTRIC FIRE Repair

Remote control batteries corroded sprung terminal. Refurbish one sprung terminal required.

Truma

Truma Repair

The remote control handset has got corroded terminals from leaked batteries, it was working okay before the corrosion.

Valor Petros Chrome 850

Valor Petros Chrome 850 Repair

There are 4 buttons on the control - On/Off which has to be used for any function, a Lamp button which activates the fires lights without any heat and Heat 1 and Heat 2 which as they say provide two levels of heat settings as well as illuminating the fire light. The On / Off function work as do the Heat 1 and 2 buttons and fire light comes on when the Heat 1 or 2 are pressed. THe only function that has stopped working is the 'Lamp' only button.

HSL

HSL Repair

Cable needs replacing and some buttons work intermittently. It may just be the cable but unsure

POWRTOUCH EVOLUTION Single axle

POWRTOUCH EVOLUTION Single axle Repair

Handset not switching on ( no green lights), battery replaced with new 9 volt, still no green lights. No lights at all evident, presumed dead.

Quattro Caravan motor mover

Quattro Caravan motor mover Repair

I switch on the motor mover in the control box and then i go to the remote and i cannot get it to switch on, in that i dont see a light and pressing it twice does not switch it to the Green light on position.


Dimplex RC01-020 (RC01-008 Variant)

Dimplex RC01-020 (RC01-008 Variant) Repair

Regardless of fresh batteries the remote ceases to function

REICH RK MOVE CONTROL

REICH RK MOVE CONTROL Repair

I believe the buttons don't work,lit up sometimes

Celebrity

Celebrity Repair

The cables at the bottom of remote are damaged

Multi-code

Multi-code Repair

Red indicater light working but garage door not operating

Emove  303A

Emove 303A Repair

Only works when it wants to, which is only occasionally, not sure if there is a loose wire somewhere.

Seip  se40tx

Seip se40tx Repair

The only button is not working


First Page Previous Page Next Page Last Page

View Details of our older (archived) repairs