Remote Fixer - Handset Repair Specialists

Contact Us    Book Your Repair


  (UK) 0151 272 1039

Closed - Open Mon at 09:30am


Repair Work Carried Out At Remote Fixer

Darley

Darley Repair

The remote does not function as intended. None of the buttons work but the motor on the bed in the salon is fine as other remotes do function when plugged in.

TEMPUR  HS SPLINE 65044

TEMPUR HS SPLINE 65044 Repair

As far as I can tell its the raising and lowering that has the fault, originally it was intermittent but now the light flickers (instead of solid) and nothing works up or down.

Shaker Plate

Shaker Plate Repair

Centre large button not working

H S L

H S L Repair

A button is not working

Infinity

Infinity Repair

One of the battery terminals (enclosed) has become detached and it's no longer working.

QUAD

QUAD Repair

I have a problem to reset remote control. Manual says: To RESET, put the remote control into the Charging Cradle with "SOURCE" key pressed. When you release the SOURCE key, “RESETS” appears in the display beside a key. The remote control can now be removed from the Charging Cradle. After you briefly press the SOURCE key, the display shows "press any key". After pressing a key, the initialization process starts and, after a short time, all attached devices should be represented in the remote control display, on the "top level menu". All goes in line with manual recommendation, but on step "press any key" it show error message and initialization process is not started. This issue appeared after batteries change, therefore I suggest I didn't changed it in a proper way. Hope you can find a root cause and repair it.


HSL chair

HSL chair Repair

Foot rise button and back rise button not working. Only button working is the chair riser.

Truma

Truma Repair

Control seems to have no power.

Mertik Maxitrol  G6R-H4T5

Mertik Maxitrol G6R-H4T5 Repair

Hello, as discussed on the phone just now, the battery icon at the top-right of the display flashes, indicating low battery, but the problem was not addressed by replacing the battery. From a look at your website this appears to be a common issue you have fixed in the past relating a faulty 7133 regulator.

Gazco Mertik Maxitrol  G 30 ZRHSO-Z26

Gazco Mertik Maxitrol G 30 ZRHSO-Z26 Repair

No signal to Fire.

Eurohea

Eurohea Repair

Led screen damaged/ no longer operates receiver/fire

Hitachi

Hitachi Repair

dead intermittent operation


CAZCO

CAZCO Repair

Seems to be the unit not working, remote ok

POWAKADDY ROBOPKADDY

POWAKADDY ROBOPKADDY Repair

it was working fine then i went away for 3 months abroad and came back to it not working.

Flamerite electric fire YCT 100

Flamerite electric fire YCT 100 Repair

Control not working and power light not illuminated on the controller

Gazco / Copreci MMB22600 / UCMB22600

Gazco / Copreci MMB22600 / UCMB22600 Repair

Remote functionality stopped working previously but fire still worked with manual operation (remote or receiver could be that issue). The fire is now not working - the batteries are causing continued ignition sparking and I have also seen sparking on the receiver board, suggesting a component failure and/or short circuit and the fire doesn't start now.

Tilevision

Tilevision Repair

Unsure if remote is functioning properly

Velux  WUR 101 5001

Velux WUR 101 5001 Repair

Window no longer responding to remote at all


Dru

Dru Repair

Just stoppped working, replaced the battery and nothing. The back battery door was melted by us a few years ago but the remote was working fine, just the battery lead was hanging out the opening. It then just stopped working so I think some wiring is loose.

Magiglo VAL 0764

Magiglo VAL 0764 Repair

Does not control the fire

STENHOJ

STENHOJ Repair

Switch not working

Panasonic TV N2QAYA 000220

Panasonic TV N2QAYA 000220 Repair

Spilt glass of wine over it None of buttons working

Wharfedale  Vista 100

Wharfedale Vista 100 Repair

Volume buttons and power button and some of the other buttons are not working, the remote was looked at and fixed in March 2023. Could you please take a look and fix the remote control buttons.

Gazco. Mertik Maxitrol.

Gazco. Mertik Maxitrol. Repair

You have repaired this before Xmas. Thank you. Of all things some water was spilt and must have entered the display and is now fragmented and doesn’t work.


First Page Previous Page Next Page Last Page

View Details of our older (archived) repairs