Repair Work Carried Out At Remote Fixer
Adjustamatic Beds Repair
Power will not switch on. Cable strain sleeve is perished
Merlin m872 Repair
No response when buttons are pressed,light doesn’t even flash
HULSTA Repair
Only one set of buttons work on extreme right. The others have slowly become a problem until they stopped making contact recently.
Gliderol 27mhz Repair
I have two of these, repaired by you some years ago. One is now working intermittently, the other not at all. Both batteries have been replaced and the led lights are working. The base unit manual switch inside the garage is working.
1 x HSL chair remote, 1 x Sherborne chair remote Repair
cable needs replacing
Klarstein Repair
The remote is for an electric fire I bought new direct from Klarstein. It has never worked. We've tried different batteries but we can't get the remote to come on. It would be great if you could get it to work because the fire won't work without it. They have issued a refund for the fire but it seems a shame to skip it.
Waview Repair
no buttons work, cannot switch tv on (not TV as this is powered on).Tried changing battery a couple of times, but remote is lifeless
HSL Repair
None of the buttons work, someone has checked the motor but think it’s the remote that is faulty
Powakaddy Repair
The radiometrix unit internally has come away from its soldered connections. Please be aware, there is super glue residue from a previous attempt to hold in place.
Mitsuco Repair
Remote not connecting to air con unit, sometimes works if warmed up on radiator ?? . I have another remote and that works , So fault with this remote.
Gazco Repair
The turn down/off switch faulty. Starting to only work intermittently.
Celebrity Chair Repair
Wire into the base of the remote control is broken the wires are exposed and therefore the connection is not getting through. Buttons appear to be fine. But haven't been able to testbit as the wire is beokwn
Sleep Secrets Repair
When to change battery but the internal parts came apart
Infinity 780FL Repair
Despite changing batteries, the remote isn’t working properly. Buttons don’t seem to be responding and actioning the requests. Sometimes the remote will just reset to 00:00 on the time even though the batteries have not been removed.
john Lewis JLHDA918 Repair
I changed the battery and it was working fine but then stopped- I think it is a loose internal connection.
Hormann HSE2 - 868 - BS Repair
The 3 fobs were working but very slowly. I assumed that the batteries needed replaced. I have put 3 new batteries in the fobs but they aren't working any longer and no light appears when I press the buttons. I'm not sure if they need repair or re-programmed but how do I reprogramme if I can't get a light from the fob when i depress the buttons?
Climapro2 RF Repair
Dropped on floor, screen not working and background looks damaged.