Repair Work Carried Out At Remote Fixer
Dimplex electric fire Repair
Nothing is working on the fire via the remote, it was fine last year when we last used it
Gazco Mertik Maxitrol Repair
Despite replacing the battery for a new one - twice, the battery light is still flashing and showing low battery. The remote control won't talk to the receiver and turn the fire on.
Winter warm Repair
Won't switch the heater on. I have changed the batteries
AmberGlo Electric Fire AGLO64 Repair
Remote was accidentally dropped and the battery spring connector fell out and was mistakenly discarded. Apart from that remote in excellent condition.
Flamerite Fires YCT-100 Repair
On switch rarely works when pressed, button has now cracked. Off switch is also temperamental.
Powertouch Repair
All buttons work as small red leds indicate but no signal to electronics box tried all asked from Powertouch bu does not work
FATMAN iTUBE Repair
The device still works, but the battery drains within a day or two even with non-use.
CHAPTER AUDIO Repair
REMOTE STOPPED COMMUNICATING WITH THE PREAMPLIFIER. NO REMOTE FUNCTIONS AVAILABLE.
Concern for Comfort Bed Repair
The buttons for raising and lowering bed, top & bottom very hard to operate
Seceuroglide (SWS) Repair
Pressing any top buttons, light on remote turns on, no shutter operation, changed battery, still the same.
Flamerite Repair
Faulty button. Second row, first button that turns the heat on.
Celebrity Repair
Although handset does not have a part number, Celebrity cannot supply a part number, but have tentatively suggested that it is JM42 (TH1-1012 Series). The chair is a 'Manhattan', dual motor recliner riser, Batch No: 329183-001/F 648R1GTM. All buttons seem to work intermittently, and if there is a dual action, such as a reset to the footrest + back, only one is actioned. The fault may be one of the core cables as when the cable is moved when handling, the fault briefly disappears.
Truma Mover S Repair
Battery connections broken, All buttons and chip working as It does work.I made a temporary connection using a piece of tin, So it just needs the spring connectors replaced if possible.
Optoma Cinemax p2 Repair
Remote won't charge, sounds like rattling noise if you shake the remote
