Repair Work Carried Out At Remote Fixer
Gloworm Repair
Screen was poor last winter. Blocky / streaky but useable. Has been without batteries all summer. Put new batteries in today and was able to set times and turn heating programme on etc. A few hours later and all I've got is the backlight with a totally blank screen. Help!
Celebrity Repair
I bought the chair second hand.The previous owner had repaired it by cutting into the cable about an inch under the controler and pulled the snapped light red wire out and taping it together. I didn't know this till it broke. I have repaired it twice but the wire has broken more and will no longer reach. My mother's chair is now stuck with the footrest up.
Celebrity Repair
The reset works ok it’s just the other two not working properly and I did do a crap solder repair!
Seceuroglide garage door Repair
Red stop button is working. Green & grey buttons aren't working.
MERTIK MAXITROL G6R-H4T16 Repair
No response from the receiver when press any buttons on the remote. When performing pairing / learning code from the receiver, no response from the receiver when press the down button on the remote for pairing.
Musical Fidelity 3.2 Repair
There seems to be only 2 buttons not working on the remote. The buttons not working are the 2 volume buttons in the amplifier part of the remote control
Topflight RAVAGLIOLI Repair
The remote is constantly on ie there is a red light flashing all the time. Also the negative wire has come off the battery connector.
Mertik Maxitrol (Gazco) G6R-H4T5-GA Repair
Several attempts to light fire with remote failed, the lcd indicated low battery. I removed the PP9 battery but the negative lead had become detached.
HSL Repair
All Buttons stick in at different times, plus the feet up button is very difficult to use and works in little jerky moves
Quattro Repair
Motor mover would switch on after a lot of attempts, now it won't switch on at all
Atina he Repair
Remote has no display and is not working fire despite new batteries
Adjustamatic bed Repair
plastic coil on cable breaking down and revealing wires
Tempur Repair
Put new battery in but does not work. I think a small part is broken as it does not seem to hold the battery securely.
Adjustamatic Repair
The cable is badly frayed and needs replacing. The on/off button is difficult to operate, it needs to be pressed quite hard to work.
Hsl Repair
Main cable,taped covering exposed cable and 2 left side buttons not working without having to push button hard.
B-63600 Repair
Control will not lower flame to minimum. All other button functions are ok. The lower flame button light on the control does not illuminate when the button is pressed, the other three buttons do. So fire will only operate on maximum flame setting.
RCS01C Repair
The fire does not respond to the rc. I have changed the batteries but still no improvement.
Toyama Repair
Clock works but all other LCD items don't. I think it might be power related
Velux Repair
the stopped working on it ages ago and now it has stopped working completely. Hopefully a cleanup of the connections will fix it.