Repair Work Carried Out At Remote Fixer
Dunlopillo Repair
Control is intermittent in all positions and both up and down. Operation can usually be achieved by moving the control to find a ‘sweet’ spot. I have taken photos if this will help to identify my unit. If so let me know where to send it.
Dimplex Repair
Spoke with nice chap called Martin a few days back & explained taken remote back to shop Our Mam bought fire from 20 years ago! Seems it is sending a continuous signal & Martin said sounded like it had shorted out! We live in hope you can fix it me dear! xx
HSL 11127-2039-009 Repair
The wires are all stripped out, and the only function that still works, is the up and down motion of the footrest. My Father has advanced dementia, so pulls at the wires a lot of the time!
Glowworn Climapro2 Repair
The internal temperature is reading 35 degrees when it’s not. reading is not going up and down as normal when temperature changes.
Velux Integra Repair
It was working but needed new batteries. I replaced the batteries and it just appeared to die. Screen is blank.
Westin Repair
Remote fails to communicate with the extractor. Battery replaced. Unable to select pairing mode as per the YouTube link.
Tempur Repair
Remote control suddenly stopped working. Light not lighting up on remote so no idea if loose connection
C & J Repair
Remote LED comes on, but fire does not respond. Batteries are good in fire, and if I disconnect & connect the battery box, I can hear the mechanism in the fire booting up.
Valor Repair
None of the buttons are working. One of the battery contacts seems to be rusty.
Nu-Flame Repair
It will not connect and start the gas fire. The batteries have been changed numerous times.
BeModern Burnaby fire 1668 Repair
The remote has stopped operating the fire. We are advised that this remote is now obsolete as the sixth button which operates led lights either side of the fire does not appear on the current remote.
Honeywell Repair
Not all the information shows on the display screen. The button to turn up the heating doesn’t work easily.
PDT KF04-433RC Repair
1st remote where top green & red don't work (or light led) but other 2 operate LED, green will lower shutter, grey never had a function:
serial no: 156216
2nd remote is with all buttons operating led but no response from shutter:
serial no: 156254. Just suddenly stopped doing anything. Have tried re linking with system but no change
Obviously I have tried changing batteries with both
My control box
serial no: 060552
10Y01C17 I believe it to be a YCS RF02 commercial if that is any help
Truma M2 Repair
The remote simply went dead mid operation. It reactivated briefly for several minutes then went dead again never to revive.
Tamiya Repair
Wouldn't turn on despite changing battery. Took apart to see if any obvious fault, none that I could see.
Belfire Repair
The battery metal connection came loose , so battery can't connect
Mertik Maxitrol G30-ZRRTT Repair
Same description as: https://remotefixer.co.uk/repair-8739.html Increase flame is not working.