Historic Repair Work at Remote Fixer
Browse our archive of completed remote control repairs. Showing page 258 of 318 (7,633 total repairs). We no longer list individual jobs — these are historic records.
ADJUSTAMATIC Repair
Suspect broken wire / loose connection / dry joint - only works when wires moved around.
View Details
B&Q AirCon Repair
Remote had a leaking battery which seems to have affected the chip directly underneath the battery wires. Remote only turns the unit on and off and we now can’t adjust the temp, speed settings, or other features.
View Details
Carver Motor mover Repair
When fitted new batteries In remote ,mover is very juddery some time works for a while then not ,sideways works better than Bach and forth
View Details
Gazco mertik maxitrol G30-ZRHSO-Z26 Repair
Unknown fault but believe dropped to floor. Light comes on but has fire does not ignite using remote.
View Details
Purpleline Enduro EM103 Repair
Cannot get the remote to light up, or work. Have put a new battery in and checked that the wire connections are as tight as possible, but it just appears "dead" Has worked OK up to now. I suspect that a wire might be broken, or a connection within the motherboard inside the remote control.
View Details
Gazco Marlborough NG EL0240 Repair
The control no longer functions to turn the fire on/off
View Details
Mertik Maxitrol Repair
Fire does not light, appears that the low battery warning is permanently displayed causing no signal to fireplace.
View Details
Vibradorm Repair
Customer brought remote into us, hard wired cable seems loose and not right. Unsure which buttons work / don't work. I believe it may just be the main cable that is the issue.
View Details
Gazco Repair
Constantly displays low battery and have changed to new ones numerous times
View Details
Mertik Maxitrol G30-ZRRS Repair
The remote works fine, but the receiver only works turning the fire up. The down control does not work. The receiver light illuminates on the up function only. There are new batteries in both the remote and the receiver units.
View Details
Velux 3LR A01 WW Repair
Does not switch on , even with new batteries replaced. evidence of batteries corrosion.
View Details
Nuflame Repair
Looks in good shape mechanically but does not seem to be working, the led light does not come on when buttons are pressed.
View Details
Mertik Maxitrol Wonderfire Airflame Excel MK.3 Repair
One of the control buttons has always needed excess pressure to activate the fire, however this has never seemed to be a major issue as it has been this way for last few years. HOWEVER, now and this may not be related to the button situation but I am reporting it in case it is significant. The issue is that the remote randomly activates turns on the fire without any operator action i.e. it has been observed to turn on the fire whilst the remote was untouched sitting on the table - the little red light comes on the remote and stays on. Battery had to be removed from the remote for safety, as it has turned on the fire whilst we have been out of the house! We have tried new batteries in both the remote and the fire. Fault is intermittent, but because of the safety issue of random activation turning on the fire, we can no longer use the remote for control of the gas fire - even hiding the remote in a drawer, does not always stop the remote signal turning on the fire.
View Details