Repair Work Carried Out At Remote Fixer

Mertik Maxitrol

Mertik Maxitrol Repair

The remote switches the fire on OK but will not turn it off, (the return button?). NB It was repaired in June, ref. RF 22050. Worked OK to begin with. I have not enclosed the battery which I hope is OK.

Hunter stoves Herald 6 gas stove mertik maxitrol

Hunter stoves Herald 6 gas stove mertik maxitrol Repair

Remote does not connect to receiver.. I have renewed the batteries in both the remote control and the receiver, to no effect. The sender appears to be working's the temperature is on display. I have removed batteries for posting. I will send both the sender and receiver.

Motocaddy

Motocaddy Repair

My charging port on the remote control isn’t taking the charger correctly and therefore not charging

DIMPLEX ELECTRIC FIRE RC01-024

DIMPLEX ELECTRIC FIRE RC01-024 Repair

Changed batteries won’t operate fire

Reich

Reich Repair

Remote does not turn on. Occasional flash from led that indicates power is on, but otherwise nothing.

PowrTouch

PowrTouch Repair

What was an intermittent fault is now permanent. The unit will not switch on when both power buttons are pressed. A new battery has been installed, but to no good effect.


Pioneer AXD7694

Pioneer AXD7694 Repair

On/off button and the volume up/down buttons have stopped working

GAZCO

GAZCO Repair

Loose wire in battery connector

Evo powertouch

Evo powertouch Repair

Old battery removed which showed signs of splitting. New battery fitted but remote will not switch on

Willow brook

Willow brook Repair

The remote wires needs replacing.

Sherbourne

Sherbourne Repair

Seat back recline not working, started as need to bend cable at control handset grommet to operate, now non operational. Suspect broken wire.

Mertik maxitrol Gazco

Mertik maxitrol Gazco Repair

When buttons on remote pressed, RED LED lights up but the receiver LED does not light or respond to signal. Borrowed a remote and the fire works correctly which indicates it’s the remote that’s faulty.


Linear Treadmill

Linear Treadmill Repair

New battery but no response from the treadmill

NuFlame Mertik Maxitrol  G6R-H4S-N2

NuFlame Mertik Maxitrol G6R-H4S-N2 Repair

Intermittent fault. Sometimes works, sometimes doesn't. Light sometimes comes on but fire doesn't ignite, sometimes fire doesn't go out. Have changed battery to brand new several times to check, and had gas service engineer check the fire itself. We would be grateful for you having a look at the handset which we think is intermittently faulty.

Celebrity chair

Celebrity chair Repair

brought chair second hand and no cable cover on wire remote. Please check all buttons also.

Television bedframe

Television bedframe Repair

Remote control split, buttons not working or seated in incorrect positions.

Neostar

Neostar Repair

The remote will not longer turn the fire on (There are no other buttons on the fire to turn it on.) the red button has been getting harder to turn on,needing more pressure.but the fire has nothadmuch use over the years.

Gazco

Gazco Repair

Completly dead, use to switch on electric fire end of evening it did not work batteries replaced still no go


RS0192SRD1e

RS0192SRD1e Repair

Remote stopped working. May have been washed but not certain.

Recliner factory chairs

Recliner factory chairs Repair

Light off no movement. Wiggle wire light flash on on off sometimes work now has stopped working

Pioneer  AXD7698

Pioneer AXD7698 Repair

"Volume+" not very responsive. "Volume-" not very responsive but more so than "Volume +" I did open it up and you can see the "Volume+", "Volume-" and "Mute" contacts are wearing out. Could you also check the others and replace if there is any wear. Many thanks

Gloworm

Gloworm Repair

Screen was poor last winter. Blocky / streaky but useable. Has been without batteries all summer. Put new batteries in today and was able to set times and turn heating programme on etc. A few hours later and all I've got is the backlight with a totally blank screen. Help!

Celebrity

Celebrity Repair

I bought the chair second hand.The previous owner had repaired it by cutting into the cable about an inch under the controler and pulled the snapped light red wire out and taping it together. I didn't know this till it broke. I have repaired it twice but the wire has broken more and will no longer reach. My mother's chair is now stuck with the footrest up.

Celebrity

Celebrity Repair

The reset works ok it’s just the other two not working properly and I did do a crap solder repair!


First Page Previous Page Next Page Last Page

View Details of our older (archived) repairs