Repair Work Carried Out At Remote Fixer
Mertik Maxitrol Repair
Remote back cover is missing but secure with tape. The remote red led comes on when pressing up or down.
The receiver is dead. No red led light or any action when pressing remote.
Gas fire is working without problem manually and I think the remote/receiver was working ok last year.
New batteries were used for testing.
SIT Gas Fire Repair
use with a Brilliant Ledge 30 Gas fire The remote Will sometimes switch the Fire off but will not ignite it. The fire operates normally in manual mode. Tried all the usual things like new batteries etc. no joy!
denon RC-1127 Repair
most buttons do work , but the ones I need to tune my dab radio in don't these are the ch- and ch+ buttons ,also there are 1 or two that don't work either , thanks for looking .
Triton Repair
Top right button has lost its plastic covering.
Middle right button has depressed into its casing
COPRECI MMB 22600-02 Repair
in spite of new battery, remote control switch randomly from "on" to "off" and vice versa, it can happen as well by pushing button like SET or ON/OFF.I tried to glue battery contact(not well aligned with one of the 3 battery) on the back believing of a short circuit but result remains the same
Gazco Manhattan Repair
Have to press really hard for a long period of time and wave around to get it to turn on flame effect, low or high.
Gazco MMB22600 Repair
Remote doesn't work, come on, even with new batteries.
PDT KF04-433RC Repair
Just stop working. No lights flashing. Battery has been changed but not make any difference
Mertik Maxitrol G6R H4 T1 Repair
The remote doesn’t work at all. No display and no reaction on the reciever. The same as Sith an empty battery. I changed the battery but stil no result. Checked the wiring from the battery to the PCB but that was also OK. Problem must be in the PCB.9
Marantz RC010SR Repair
The product has become unpredictable over the past year, only working if pointed in a certain way, then not working then working again etc. At some point in the past the buttons were a little sticky so I suspect our child spilt something on it but it continued to work. Now it seems to have stopped altogether
Mertik/Maxitrol G30-ZRRTT - Remote and Receiver Repair
Remote does not properly work when new battery is installed. Remote turns on but time cannot be set and goes into ongoing countdown mode. Buttons will not operate.
I am sending both the remote and receiver for evaluation and repair.
VIBRADORM 10.053.003 ASa/HKu 0.5 10/1/2013 Repair
Appears to be no power. First one end of the bed did not respond but shortly after neither end responded and there was no light.
Mertik Maxitrol G30 - ZRHSO - Z26 Repair
Doesn't work following being dropped
Toshiba 37BV701B Repair
The remote was going faulty - sometimes it worked when buttons pressed - at other times it wouldn't work. Then it just gave up altogether! I've tried various battery replacements, etc - but it does not work at all . . .
Brilliant Ledge Repair
The remote works intermittently . Gas engineer said I should replace it but will found your site and am hoping you can get it working properly again!
Pioneer AXD7511 Repair
LCD screen not functioning but buttons on remote work. Changed battery, but same issue
Verine Fire Repair
All buttons not working and battery wires broken. They don't click like they used to either i.e. No sound when pushed in.
Audio Pro Addon T20 Repair
The remote control is not working period. The lights on the main speakers come on and I have changed batteries a few times on the remote but no change