Repair Work Carried Out At Remote Fixer
Enduro Quattro Repair
Handset left in damp front locker in error and no longer communicates with main box.
Be modern detroit RCS-01C Repair
Sonetimes not operating....now stopped.......possibly reciever issue...
Dimplex RC01-008 Repair
Nothing working at all ?
Changed batteries several times and checked fire is working ok manually.
Last time used no problem at all ??
NAD SR-4 Repair
quite a few of the buttons not working.
Tuner, Aux, Tape 1 MON, Video 2, 1, 2, 3, 5, 0, +10, Volume +, Mute (intermittent), Tune +, Volume - (intermittent), Time, Repeat, Delete.
Powrtouch Mark 1 Repair
The remote does not connect to mover. Looks as though there is a diode thingy that has come away
Gliderol 27 Mhz Repair
Been dropped a few times. Stopped working through this
Merton maxitrol G30-ZRHD Repair
Not worked after dropping remote on to floor. Remote display shows it seems to be working. But receiver not responding.
Brilliant Repair
Battery left in remote leaked and wire has come loose, think part of battery connector is missing too.
Charlton and Jenrick Ltd Paragon 2000 Turbo Repair
Nothing happening, no lights despite new battery put in, no response from fire at all.
Mercik Mertik Maxitrol G30-Z RRs Repair
Only works to turn fire on will not turn down or off
Mertik Maxitrol (Magiglo branded) G30 ZRHS Repair
Remote operates correctly on command, most of the time. However it intermittently activates of its own accord, without user command, for about 1 second and "turns up" the fire slightly. Only way to stop the problem is to remove the remote battery after every desired command...
Metric Maxitrol G30 ZRRS Repair
The receiver unit is not working, the LED light is not coming on. Replaced the batteries but it still won''t work. The LED is lighting up on the handset transmitter
Purple Line (e-go) Quattro Repair
remote emits tones etc but does not communicate with control box in van.(relays do not trigger). I have another Quattro remote which synchs and operates mover correctly. Have tried the matching procedure but no success.
Mirtik Maxitrol G 30 ZRRS Repair
The receiver box will only get a signal very close up and not at all when the unit is in place behind the gas fires metal cover.
Verine Fire Repair
The buttons have to be pressed in very, very hard to get them to operate the fire. Sometimes they will not work at all which is obviously a problem if the fire is on and then can't be switched off. I have of course tried new batteries in (which I know to work) and this doesn't help. There is something wrong with the remote itself
Electric Fire TVs-01c Repair
Buttons only work after fiddling and pressing hard for min 10 mins