Powrwheel Repair

Not powering up

Carver CA 27 Repair

The on/off button does not always work when pressed down, you have to press down quite hard for it to work

triton Repair

Remote control won't work

Powakaddy Robokaddy Repair

Handset communicates with trolley, intermittently. I think there's a loose connection the handset because it drains the PP3 Battery very quickly. Sometimes the green light (which indicates communication with the trolley) stays on. Sometimes it doesn't come on. It's a bit baffling. My trolley is 10+ years old but still works well. I could use it manually but it seems a shame not to have the remote working. Please can you help.

Sony RM-SSD1 Repair

Intermittent fault on remote (no buttons working). IR signal is permanently on when not working.

MERTIK MAXITROL B6R-H8TL3B Repair

Powers up, screen broken I think, Not sure how its happened.

Blyss Caroline wall hung fire LDBL2000oa - DDSR Repair

The remote was left for a year without use with the batteries left inside. The negative end of one of the AA batteries has leaked destroying the negative silver wire spring terminal. The positive half of the terminal wire unit is OK but no longer linked to the negative side. The damage is restricted to the rear end of the remote's battery compartment. The terminals at the circuit board end of the unit are fine.

Pioneer AXD7483 Repair

dropped it, does not work now. Also: receiver button and I think volume button do not work well, maybe worn. Maybe some others too.

Truma se Repair

Hi Martin I spoke to you on the phone this morning regarding my remote

Will not switch on or off, (Remote unready opened up) PCB mount has top peg broken and red slide on/ off is not moving power switch. It has been difficult to switch on for a while & as a result it has worn the switch that is mounted on the PCB (so I think in probably needs a new on/ off switch..

panasonic n2qay8000428 Repair

volume control rocker does not operate in lower volume mode

Gazco Repair

Loss of connectivity with the fire. Tried changing battery but that did not work.

Mertek Maxitrol Repair

Works intermittently ; loose connection

Vibradorm bed Repair

Terminals inside the handset appear to have become fused to the bottom of the old battery(included). Result - nothing works.

purple line Repair

worked a month ago, put new battery in but no red light or sound know. completely dead.

truma m2 Repair

Working last week, NO green light have renewed batteries still no light.

Mertik Maxitrol G30-ZRHSO-Z26 9V DC / G30-ZRRS 6V DC Repair

Both only work to turn fire on and off if very close together about 50mm, light on remote goes on but light on receiver only works if remote very close, receiver starts to flash they eventually light stays on and works to turn the fire on and off, but will not work if any distance away

Quattro Repair

Whilst there is power to the unit as it beeps when i follow the rest procedure, the actual power button itself does not respond, and therefore i also don't know if the other buttons are working.

Wurlitzer RCS-K No: 0059745 Repair

Remote was new to me and worked fine for years and stopped.

Domestic Heki Repair

Corroded battery terminals

Yamaha RAV211 (V429770 EU) Repair

No buttons work, the remote was dropped then stopped working. Also the battery flap retention clip is slightly damaged so if that could be fixed it would be great but I'm happy to use tape to keep it closed. The main thing is the functionality of the remote. Thanks :-)

Xpelair Repair

Our engineer can't get the remote to send a signal to the a/c system. We have tried new batteries

Flavel Fires RCS-01C Repair

Unit does not work. No buttons seem to function

Truma SE Repair

saturday evening the remote stopped to function. Tried to change batteries, but no success. Nothing seems to be broken

purple line Repair

power going to board but wen you press red button twice nothing happens no red light comes on