Repair Work Carried Out At Remote Fixer
HSL Repair
All other buttons on remote seem to work fine but the one that raises legs takes ages to work and requires a lot of pressure to work. But please let me know what you think.
Glowworm Climapro2 Repair
The controller is unresponsive. I’ve changed the batteries, but this hasn’t helped
Gazco Repair
Won’t start fire when new battery installed the battery indicator is showing empty
Acoustic Energy Repair
Was working then stopped. tried changing the batteries - nothing. Did the trick where you look at the front through a phone camera while pressing buttons and yes, it does flash. You've fixed if or me before, back in march 2021 and I'm hoping you can do it again. Thanks.
Legend Aura Landscape Repair
You have to press the POWER and STAND-BY bottom together to turn the fire on. The STAND-BY button flashes when you press it, so seems to be working. The POWER button doesn't not flash so seems to be a problem with that. Hence, my fire will not turn on.
HSL TH27-2039-013 201311050047 Repair
Buttons at bottom not working properly it’s not lifting chair . Wires on remote needs fixing and covered up.
ACR Repair
Unit illuminates but does not appear to be able to communicate with the fire. Fire controls work manually
Mertik Maxitrol Repair
Looks like there has been a battery leak in the receiver part and there is no beeping at all between the remote and the receiver
Gazco MMB22600 Repair
Remote not communicating/operating fire. It once “beeped” when increasing/decreasing flame size on remote, no longer making sound.
Waltham leather riser chair Repair
Remote control seems to have power coming through but doen't work.
Oppo bdp105d Repair
Remote is in very good visual condition but stop working , was checked on few pair batteries
Glow worm Repair
Not working at all. Blank screen, and no power despite battery change, unsure of the reason, may have been some water damage.
Celebrity Repair
The chair is used by an elderly relative but the buttons, although they work, now need to be pressed very hard to make them work.
Mertik Maxitrol Repair
The springs in the battery casing have come loose and are missing
Gutmann Repair
Just stopped working, was working being but a bit temperamental with the off button for the extractor fan but ramp up and down worked ok for the fan and the light on and off all good but now nothing working.
Flavel Jazz - Mertik Maxitrol Repair
Hi my gas fire really hasn't had much use and neither has the remote control even though it has been installed for quite a few years. The fire works absolutely fine but the remote will simply not light the fire nor will it increase/reduce the flame. It does nothing at all. I changed the battery to a brand new one and still nothing happens. The red light does illuminate when you press the remote but it will not connect with the fire. Hope you can help.
Powertouch Evo Repair
The remote does not switch on after pressing both activate buttons. New battery fitted, eventually the lights activate after several attempts. The red lights on indicators show but nothing else. Motor mover is a manual type. The van battery is fine.
Powrtouch Repair
It takes a long time to switch on and I have to press the two green buttons a number of times. Once the remote has become active, with the green light displayed at the right, the unit works absolutely fine. I have changed the battery (a number of times) but it doesn’t make any difference.