Repair Work Carried Out At Remote Fixer
TV54K2 Repair
Gradually different buttons stopped working then the remote stopped working altogether.
Celebrity Repair
was working then when we came to use it the hand set went really hot and smelt like something was burnt
Sherborne TouchStop Repair
The control is no longer operating the chair. I have been able to isolate the problem to the remote as I have another matching chair and have been able to use this to check that the chair is not faulty. There is a rattle in the remote so I guess something has come detached
Valor Repair
Remote not working at all. 6 months ago the old battery’s had leaked and I cleaned up the connections and fitted new battery’s but now not working.
HSL Repair
Intermittent failure of remote possibly due to broken exposed wires.
Enduro Repair
We accidentally left remote in caravan front locker. The only thing we can think of is water damage. But after it was left in the locker for a week it stopped working
Panasonic Repair
Won’t respond at all. Changed the batteries, checked the connections as far as I can but no success . The machine works manually but not all the functions do. Hope you succeed, it’s old but good.
Recliner Repair
Buttons for back stopped working and cable holder part has come out of remote
Sony RM-LJ304 Repair
Dead. Will not turn on, even with new batteries. Works with a Sony STR-DB940
Jensen Dynamique Repair
It was dropped on hard floor. Completely opened up and I tried placing it back together again but it didn’t work.
John Bean Repair
Remote looks to be in fragile condition, exterior secured with cable tie & assume that the internals are possibly no longer connected to relevant components, & this is why the remote is not working. No lights or infrared displaying.
Gazco Repair
The handset illuminates but doesn't seem to generate sound. The fire can be turned on by using a vacuum cleaner next to the receiver!
Valor 860 Repair
On off button needs to be pressed hard and sometimes does not work. Battery's replaced and unit contacts had been cleaned, still hard to turn on/Off
Honeywell Repair
I'm unsure whether the remote control is sending a RF signal to the receiver. The gas fire doEs not ignite when pressing the start up buttons. It could be a faulty remote control or a faulty receiver. I would like to know if the remote is working.