Repair Work Carried Out At Remote Fixer

Titan 83309640

Titan 83309640 Repair

off remote button plastic cracked needs new cover otherwise all is working.

Triton

Triton Repair

buttons not responding

Faber

Faber Repair

Gas fire will increase the flame but will not lower flame

Merton Maxitrol G30-ZRHSO-Z26

Merton Maxitrol G30-ZRHSO-Z26 Repair

Remote control not controlling the stove. Reciever not lighting up when remote control pressed, although light on remote control lights up. Batteries changed in remote and reciever

Nu Flame Evolution  MK3

Nu Flame Evolution MK3 Repair

Remote control wires have become detached from the clip attaching it to the 9V battery. The back cover is also lost.

Triton

Triton Repair

There are two remotes. Both for Triton body drier.

On one the increase heat button is no longer functional. The rest ok as far as I know.

The other was purchased along with a secondhand unit and has never been used. Visually one of the top buttons is missing.


Mertik Maxitrol G30-ZRRS , G30-ZRHSO

Mertik Maxitrol G30-ZRRS , G30-ZRHSO Repair

Only one channel seems to be working, can increase the temperature but not decrease

Verine

Verine Repair

Buttons only work intermittently, very difficult to turn the Fire on and Off.

Mertik Maxitrol Remote: G30-ZRHD.  Receiver: G30-ZRRS

Mertik Maxitrol Remote: G30-ZRHD. Receiver: G30-ZRRS Repair

The remote and the transmitter will not communicate with one another. I have changed the batteries. There appears to be some corrosion inside the receiver.

DIMPLEX RC01-008

DIMPLEX RC01-008 Repair

There is no output from the IR LED. New batteries have been inserted. It looks a bit corroded in the battery area.
I bought a 2nd half fireplace but it was sold as fully working. I can't manually activate the fireplace on/off. It's exclusively handled through the remote control

Denon RC-868

Denon RC-868 Repair

Remote appears dead

Flambeau 335 Basket Fire  71106-800-101

Flambeau 335 Basket Fire 71106-800-101 Repair

Battery has been changed as well as in the fireplace and remote remains unresponsive. Light does not illuminate when any buttons are pressed. All buttons remain unresponsive. Reset has been done on fire place and remote continues to not work.


Gazco arriva avanti 67

Gazco arriva avanti 67 Repair

Screen goes blank when buttons are pushed

Truma Mover SE

Truma Mover SE Repair

1 Battery terminal broken and others badly corroded due to battery acid leakage.

Sleepsecrets

Sleepsecrets Repair

Remote not working at all.

PIONEER AXD7483

PIONEER AXD7483 Repair

THE RECEIVER ON BUTTON VOLUME BUTTONS AND ALL THE BOTTOM PART OF THE REMOVE BUTTONS I ONLY NEED TO USE REMOTE WHEN SWITCH TO SUB NOT MAIN.

purpleline Enduro

purpleline Enduro Repair

red light does not come , does not operate motor mover

seceuroglide KF04-433RC

seceuroglide KF04-433RC Repair

just not working - loose circuit?


gazco p8308mc4c

gazco p8308mc4c Repair

the black wire to the battery connector is broken in the remote

Sit

Sit Repair

Works only intermittently

Auriel  TX-12CH

Auriel TX-12CH Repair

does not work anymore has been inside a pocket of a Jeans in the washing machine hans been dried shortly after Shows signs of corrosion- no mechanical defects

Gazco Mertik Maxitrol G30

Gazco Mertik Maxitrol G30 Repair

The remote control isn't working. I have changed batteries in both transmitter and receiver. I suspect that the fault is with the transmitter because the red LED doesn't come on as it used to

mertik maxitrol g30 zrrs

mertik maxitrol g30 zrrs Repair

Receiver unit hasn't been used for 2 years and the batteries have leaked, appear to have caused the unit to stop responding with new batteries inserted.

Hulsta bed remote

Hulsta bed remote Repair

You recently checked as OK the remote to this bed and it was in good working order. However it may be that the unit the remote connects with is not working. Could you please check this out. I will be sending both the remote and control unit. This bed is important and it is used by my disabled daughter and it helps her a lot. |Thank you


First Page Previous Page Next Page Last Page