Recent Repair Jobs
Hofmann Kon131 Repair
We have been told the remote is useless
Merlin M872 Repair
2 remotes Green buttoned one has been working but looks to have a bad switch it doesn't click when pressed and has loss of the power light when not functionin.This has poor working range too and has to be on top of the motor to operate it when working. The second remote grey button does not work fault unknown but you may be able to resolve, looks as though someone may have tried to replace switches maybe badly.
Bodart & Gonnet MMB22600 Repair
The remote needs to be very close to the base to work. The attachment of the RF transmitter has come off.
Brilliant Slab 16 Repair
The errors are not consistent. But the on switch does not operate the fire at all. The combination of two buttons seems to work to switch the unit off. The fire does however operate using the buttons located behind the front panel.
Buttons not working.
Firmamatic GDO-4 Repair
nothing obviously wrong with the remote but nothing happens when buttons pressed. new battery inserted and still no good.
Mertik Maxitrol G30-ZRRS Repair
Remote appears to be working. Receiver will increase the flame level red light on, but on reducing the flame the red light will not stay on and flame will not reduce.
GLIDEROL GTX-M27 26.99MHz Repair
The front plastic adhesive face cover is lifting which holds the main button. The electronics still work so hope you can repair the remote.
BFM Europe Repair
remote chewed by dog, won't come on and 2 buttons missing
None of the buttons work well. Last time it was used we could not switch of the fire using the remote control.
One remote has stopped working completely, and I had to remove most of waterproof facia to diagnose what was going wrong with it. The second remote ( as I have two body driers) also has a partial removal of the facia, but still works, but I have had to use tin foil to bridge gap between eroded solder to get the on/ off button to work. Both have essentially had steam/ water erosion from sitting in steamy bathrooms.
I think power button not working
Gazco Riva 67 Repair
Remote looks as if it's working (it does the right things when the batteries are installed) but it will not light the pilot light on the fire or adjust the flame when the fire is on.
Faber Smartphone CE0681 Repair
Not functioneel buttons ( especially fire down). Receiver functioning fine.
All buttons not working new batteries have been tried
MERTIK G30 - ZRRS Repair
Remote function to turn fire down/off works fine - light on remove and light on receiver. The function to switch the fire on or up does not work light on remote but no response on the receiver.
Carver M606846 Repair
Red light not operating. Mover not reponding.
Mertik maxitrol ZRHSO Repair
Red light does not come on all the time. Its very hit and miss
Bathroom TV Repair
none of the buttons seem to be working replaced battery but still not working
Proofvision Waterproof TV Repair
Non responsive Have tried a new battery
Cannot turn power on - have changed batteries but completely dead. Can hear something moving about when shaking so think something has come loose
Sun SBA 2000/2080 Repair
intermittent fault sometimes works then doesn't