Historic Repair Work at Remote Fixer
Browse our archive of completed remote control repairs. Showing page 107 of 318 (7,633 total repairs). We no longer list individual jobs — these are historic records.
Brilliant Ledge 22 Repair
This controller flashes but does not ignite the fire. I do have the original but severed one of the 9v connectors to the battery so that requires a new snap connector soldered. to the circuit board. If send you both can you reprogram the one that doesn't work and solder a new snap connector to the other that still does work. I. can acquire a new snap connector if you need it.
View Details
Hormann Repair
I have a Hormann garage door. I have two remotes. One works fine. The other had also been working fine but then suddenly stopped working. I thought it must be the battery and so I changed it for a new one. Unfortunately it still doesn't work. The remote has a red light when I press the button but it doesn't seem to make contact with the opening mechanism. My remote model is Hormann HSE2-868 CE 0682.
View Details
Pioneer VSX-LX53 Repair
Main 'Receiver' power on/off button not working. Also 'Zone 2' and 'Zone 3' buttons not working but may be related to main power button. Generally all buttons feel 'sticky' when pressed.
View Details
Hunter Stove Repair
The fault is exactly as per the example on your website. The down button on the remote works fine. The up button appears to send the signal from the remote but the led on the receiver doesn't light up and the fire doesn't respond. Also, the 9v connector wire snapped at some point some time ago and has been repaired with Sellotape(!) so if it's possible to fix that properly at the same time that would be great! Finally, there is some corrosion on the battery contacts in the receiver. I have attempted to sand this off but not sure if you can do a better job?
View Details
Valor Repair
The remote was dropped on the hearth and has now stopped working. No buttons appear to work. I've changed the batteries, but to no effect.
View Details
Creda Repair
The showers switches off unexpectedly or won’t switch on at first time of asking , I have replaced the main pcb but still have the same issue, screws missing from the rear battery compartment cover .
View Details
PowrWheel Repair
It is difficult to power it on, once it is powered is seems to be ok, but sometimes takes 30 minutes to power on, which obviously is not ideal. So at least power buttons seems to be affected but please check all of them.
View Details
Mertik Maxitrol G30-ZRHTT Repair
No longer works. All batteries replaced (both remote & receiver). The remote screen is working, but it is not activating the receiver (it was working a day or so ago).
View Details
HCF1 6552020002 Repair
Most of the protective covering of the lead has disintegrated, so a new lead is required. Some wires have come adrift from the control, board and need reconnecting
View Details
Bose RC38T1-40 Repair
the remote control has suddenly stopped communicating with the sound system none of the buttons work on the remote - not even on/off we now have to control from the sound system rather than using remote
View Details
Arcam solo movie mk2 Repair
Purchased as an ex-display (as new) unit so have not had it in working condition. On insertion of batteries remote backlight lit. Volume up/ down power on /off worked. Successfully Went into program mode (to assign Panasonic TV) and entered a few numbers. Then remote became unresponsive. Batteries out/ in/change nothing helped. Tried again later and this time worked again for a short period time tried a factory reset but only certain random buttons responded. Then it died again. It is not the batteries as several were used and are still in use in current RC. thanks
View Details