Repair Work Carried Out At Remote Fixer
Warmlite Repair
The remote does not turn on at all so can't turn on the fire.
Westin RC001 Repair
The remote control will switch the extractor fan lights on but will not power the extractor fan itself. The battery was replaced but the situation described above remains the same.
Hulsta Happysystzems Repair
Battery leaked. But apparently only a little. just blowing removed the white dust. It looks clean now and the contacts/spring look arent even matte. As I put another battery, lights went on and flickered. But remote didn't work correctly. Days later, as I had a new battery, the remote looked dead. No light went on. No function anymore. Inside, there is a little damage.
Mertik Maxitrol Repair
Battery cable needs replacing also voltage regulator needs replaced as battery is always showing low even with new battery put in.
MERTIK MAXITROL B6R-H8TL3W Repair
Controller was working next day screen was blank, changed the batteries and it stayed blank, i think the bottom part of the controller got hot,took the batteries out and tried later and it was the same.
MMB22600 Repair
The display screen and all the buttons on the remote all work or at least show a correct display, but the remote does not communicate with the fire. I would like to know if the fault is with the remote (and can be fixed) or if the problem is with the receiver in the fire.
MERTIK MAXITROL Repair
Black cable to battery terminal broken off requires soldering
VELUX 2014-RC003-01 Repair
Smashed screen. Believe the remote is working other than that.
Gazco Repair
the remot display is showing battery flat / empty even when new battery inserted, the display is working ok
Tempur Repair
The battery is moving ( no matter what type I use) it is still working if I take off the back and hold the battery tight against the contacts.
Truma mover TE Repair
Remote does not switch on at all. No lights or clicking noises. Batteries and main unit have been checked.
Truma Repair
Remote Control is increasingly often failing to connect and then dropping the connection even when close to the control unit.
Celebrity Dual Lift Repair
Cabling from handset has exposed the wire cabling. The remote control is not working at all.
Velux WUR 101 5001 Repair
The ‘up’ and the ‘down’ button have worked now and again for a while but now nothing is working.
Reich Repair
The on/off button has an intermittent fault, all other buttons work fine. Having taken a look inside, there is a conductor track on the circuit board which appears to have a very tiny section under the power on/off button discoloured. Cleaning this small section cures the problem temporarily.