C & J Repair

Remote LED comes on, but fire does not respond. Batteries are good in fire, and if I disconnect & connect the battery box, I can hear the mechanism in the fire booting up.

Valor Repair

None of the buttons are working. One of the battery contacts seems to be rusty.

Nu-Flame Repair

It will not connect and start the gas fire. The batteries have been changed numerous times.

BeModern Burnaby fire 1668 Repair

The remote has stopped operating the fire. We are advised that this remote is now obsolete as the sixth button which operates led lights either side of the fire does not appear on the current remote.

Honeywell Repair

Not all the information shows on the display screen. The button to turn up the heating doesn’t work easily.

Truma Mover SE Repair

Battery area. And sometimes doesn't work.

Celebrity Repair

The outer casing needs replacing that protects the wires

Dru / Honeywell Repair

No display - not operational despite battery change

PDT KF04-433RC Repair

1st remote where top green & red don't work (or light led) but other 2 operate LED, green will lower shutter, grey never had a function: serial no: 156216

2nd remote is with all buttons operating led but no response from shutter: serial no: 156254. Just suddenly stopped doing anything. Have tried re linking with system but no change Obviously I have tried changing batteries with both My control box serial no: 060552 10Y01C17 I believe it to be a YCS RF02 commercial if that is any help

Truma M2 Repair

The remote simply went dead mid operation. It reactivated briefly for several minutes then went dead again never to revive.

Tamiya Repair

Wouldn't turn on despite changing battery. Took apart to see if any obvious fault, none that I could see.

HSL Repair

Belfire Repair

The battery metal connection came loose , so battery can't connect

Mertik Maxitrol G30-ZRRTT Repair

Same description as: https://remotefixer.co.uk/repair-8739.html Increase flame is not working.

HSL Repair

Riviera UR203 Repair

Completely dead.

Sherborne Repair

West Midlands

HSL TH27-2039-009 Repair

Connecting wire deteriorated leading to intermittent operation of appliance.

McHale Repair

Initially when the remote stopped working - it appeared that as soon as the safety button on the rear was pressed, a 'stop' signal was being sent to the receiver (so none of the functions could be used). Later, the remote started sending a stop signal without any buttons being pressed. Tested with new battery. Remote has already been fixed previously by yourselves.

Quattro Repair

The on button flashes but it does not work the motor mover.

Valour dream gold 843 Repair

Lamp button doesn't work

Mertik Maxitrol G6R-H4T5-GA Repair

Display showing flat battery, replaced battery with a new one but still showing flat battery. Will not operate fire.

Mertik Maxitrol Repair

Screen broken and no longer displays anything

POWRTOUCH Repair

PUSHING THE 2 GREEN BUTTONS AT SAME TIME TO TURN ON, ONLY WORKS INTERMITTENTLY.